Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lbNo release handle is required to operate the armMaintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustmentField adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the armAngle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in loadTension adjustment at front of the arm provides additional fine tuning of lifting forceNo locking enclosure handle required, enclosure stays in place after repositioningEasily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern1.3 in internal cable pathway maintains NEMA type 4 and 12 enclosure rating and protects wires and cablesGasketed mounting surfaces at both ends of arm maintain seal integrityEnclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg incrementsStandard models are available with machine top mountingRAL 7035 light gray finish with black end supports

25 to 75 lb Load Capacity