Doors made of 16 ga, center and wall sections made of 14 ga steelStainless steel enclosures made from type 304 stainless steelWindow made of 1/4 in THK, scratch and impact-resistant safety glassFront and rear access to 19 in rack equipment provided by three part design door, center section and wall sectionSolid door provides complete physical and visual protectionWindow door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protectionAll seams are fully welded and ground smoothDoors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the cabinetPremium seamless, foam in place gasket prevents contaminants from entering the cabinetKey locking wing knob is included on painted steel cabinet, providing access control to the cabinet, two keys are included with each cabinetStainless steel cabinet is provided with a quarter turn slotted latchOne set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted front to back, is provided with each center section of the cabinet, additional tapped or square hole rack angles can be added to the cabinet to provide additional mountingOn 28 in (700 mm) wide enclosures, a 4 in vertical cable manager with composite fingers is provided on hinge side of cabinetWall section welded panel studs which accommodate standard panels

Quarter-Turn Slotted Latch