ApplicationsFor used with conduit, underground service entrance cable for direct burial at conductor temperatures not to exceed 90 deg C, RHH, conductor temperatures shall not exceed 90 deg C in dry locations, RHW-2 or USE-2, conductor temperatures shall not exceed 90 deg C in wet or dry locations
FeaturesType RHH or RHW-2 or USE-2 conductorsSouthwire type RHH or RHW-2 or USE-2 copper conductors are annealed (soft) copperInsulation is an abrasion, moisture heat and sunlight resistant black cross-linked polyethylene (XLP)Conductors shall be UL listed type RHH or RHW-2 or USE-2, suitable for operation at 600 volts or less in wet or dry locations, including direct burial in the earthConductors shall be annealed copper, cross-linked polyethylene (XLP) insulated, as manufactured by southwire company or approved equalHigh-heat, moisture and sunlight resistant60 mil insulation thicknessAllowable ampacities shown are for general use as specified by the national electrical Code, 2005 Edition, section 310.15Allowable ampacities when terminated to equipment for circuits rated 100 A or less or marked for 14-1 AWG conductors at 60 deg CAllowable ampacities when terminated to equipment for circuits rated 100 A or marked for conductors larger than 1 AWG conductors at 75 deg CAllowable ampacities RHH dry locations, RHW-2 and USE-2 wet or dry locations, for ampacity derating purposes55 A at 60 deg C, 65 A at 75 deg c and 75 A at 90 deg C allowable ampacities
SpecificationsStandards/Approvals: ARRA Compliant|Buy American Act Compliant|RoHS Compliant|UL 854|Federal Specification A-A-59544|NEC Certified