We will be doing system maintenance from August 23-24. You may experience a longer than expected online response time during the hours of 6:00 AM Saturday – 6:00 PM Sunday. We apologize for the inconvenience.
loading content
Cutler-Hammer Series S801+T24N3S
EATON Cutler-Hammer Series S801+T24N3S Non-Combination Standard Severe Duty T-Frame Soft Starter, 21.6/26.4 VAC V Coil, 3 Poles, NEMA 0/IP20 Enclosure
Cutler-Hammer Series S801+T24N3S
EATON Cutler-Hammer Series S801+T24N3S Non-Combination Standard Severe Duty T-Frame Soft Starter, 21.6/26.4 VAC V Coil, 3 Poles, NEMA 0/IP20 EnclosureNon-stock product. Available to order - lead time may vary.
BrandCutler-Hammer Series
MFG #S801+T24N3S
Werner Part #3960787
UPC786685558837
Non-stock product. Available to order - lead time may vary.
BrandCutler-Hammer Series
MFG #S801+T24N3S
Werner Part #3960787
UPC786685558837
Product Description
EATON Cutler-Hammer Series Soft Starter, Non-Combination Standard Severe Duty T-Frame, Series: S801, 200 to 600 VAC, 240 A, 47 to 63 Hz, 147 kW, 150 hp, 200 hp Motor, 21.6/26.4 VAC Coil, 3 Pole, 0.5 to 18 s Timing, 3 ph Phase, Lug, Solid State Overload Relay, NEMA 0/IP20, Starting Modes: Current Limit/Ramp, -30 to 50 deg C Operating, 6.47 x 7.65 x 11.77 in
Attributes
Documents
Features
Attributes
Amperage Rating240 A
Coil Voltage21.6/26.4 VAC
Connection TypeLug
Dimensions6.47 x 7.65 x 11.77 in
Enclosure TypeNEMA 0/IP20
Frequency Rating47 to 63 Hz
ManufacturerEaton Corp
Number of Poles3
Operating Temperature-30 to 50 deg C
Phase3
SeriesS801
Type / StyleNon-Combination Standard Severe Duty T-Frame
Wattage147 kW
Country of OriginDominican Republic
Documents
Features
Built-in overload protection, run bypass contactorAdjustable ramp times, torque control, kick start controlProgrammable overload settings, 31 to 100% (3.2:1) of rated current for the unitPhysically fits in place of most NEMA and IEC startersEasy to use control interface module, 6 SCRs controlReduced wear on belts, gears, chains, clutches, shafts and bearingsAllows for controlling the inrush current to the motorReduced inrush current leads to more stable power grid and can lower peak demand chargesElimination of water hammer in pumping applicationsLess shock to product on conveyor lines and material handling gear24 VDC control module enhances personnel and equipment safety