Locate Circuit Breakers in Panel, Test GFCI Devices

Quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected|Tester consists of two parts - a transmitter, connected to the electrical outlet or fixture and a receiver, used to scan the panel to locate the correct breaker|Receiver delivers clear visual and audible indications when the correct breaker has been located|Operates on 90 to 120 VAC circuits|Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices|Transmitter docks in the receiver for convenient storage as a single item when tester is not is use|Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets|The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411)|Receiver powers off automatically after approximately three minutes of non-use to conserve battery life|Transmitter is powered by the circuit when connected to the electrical outlet or fixture|Low battery indicator|Easily accessible battery compartment, uses one 9 VDC battery in receiver only, transmitter does not require a battery|Built to withstand a 6.6 ft (2 m) drop|Measurement category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation

Transmitter, Receiver, User Manual and 9 VDC Battery (for Receiver)