FeaturesAdjustable socket plate and detachable socket with snap-in springs to accommodate various lamp and trim combinationsMedium base porcelain socket with nickel plated copper screw shellAdjustable height remodel springs accommodate up to a 1-3/4 in ceiling thicknessShadow-free, knife edge trim design blends smoothly into the ceilingPre-wired junction box with (5) 1/2 in and (1) 3/4 in knockouts with pry-out slots, (4) non-metallic sheathed cable connectors and ground wireUL listed, cUL, CSA certified for through branch wiring, maximum (4) 12 AWG branch circuit conductorsThermally protected against improper use of lamps or insulationEnergy efficient, sealed housingIC remodel housing for remodel application where back side of ceiling is not accessibleInstalls through an opening in the ceiling from belowSecured in place by factory installed remodel springsCan be completely covered with insulationWhen used with Air-Loc® gasket, stops infiltration and exfiltration of air, reducing heating and air cooling costsDouble stack adjustable feature enables remodel springs to accommodate up to 1-3/4 in ceiling thicknessA19/BR30/BR40/PAR16/PAR20/PAR30/PAR30L/PAR38/R20 lampsThe IC rated housing can be completely covered with insulationOffers energy efficiency with an Air-Loc® installation to stop infiltration and exfiltration of air, reducing heating and cooling costs